1. Pipe Flow Calculator
Inputs: Pipe diameter, length, flow rate, roughness, fluid type.
Outputs: Pressure drop, Reynolds number, flow regime.
2. Pump Sizing Tool
Inputs: Flow rate, head, fluid density, efficiency.
Outputs: Pump power requirement, NPSH, motor rating.
3. Heat Exchanger Sizing Tool
Inputs: Fluid inlet/outlet temps, flow rates, type (shell & tube/plate).
Outputs: Required heat transfer area, U-value suggestion.
4. Flare Stack Design Estimator
Inputs: Gas flow rate, composition, temperature, pressure.
Outputs: Stack height, velocity, combustion efficiency check.
5. HAZOP Action Tracker
Interactive form to input node, deviation, cause, consequence, safeguards.
Export to Excel or PDF for workshops or team sharing.
6. ASME B31.3 Pipe Wall Thickness Calculator
Inputs: Pressure, pipe size, material, temperature.
Outputs: Required wall thickness and closest standard schedule.
7. Energy Efficiency Estimator
Inputs: Equipment rating, usage hours, alternative energy source.
Outputs: Energy savings, CO₂ reduction, ROI.
8. CFD Mesh Quality Checker (Simplified UI)
Input: Domain size, element count, geometry type.
Output: Mesh skewness, aspect ratio flags, solver suitability.
9. Pressure Drop Calculator
Input: f = Friction Factor (input/assumed), L = Pipe Length (m), D = Pipe Diameter (m), ρ = Fluid Density (kg/m³), v = Fluid Velocity (m/s)
Output: ΔP = Pressure Drop (Pa)
10. FIV Calculator
Input: v = Fluid Velocity (m/s), Density
Output: Susceptibility of failure
11. Relief Valve Sizing Calculator
Input: v = Fluid Velocity (m/s), Density
Output: Susceptibility of failure